Back to LanCentrum.sk
language:
Currency:

LAN controller V3.9 with case

LK3.9 is continuation of v3.5 series. It has same API. Is recommended for typical monitoring and automatization applications in IT enviroment.  This version  is equipped with a faster processor ARM 32F407.  It has the same functions but different firmware series since v3.5 

The device features a built-in web server (similar to all LK versions) for viewing readings and configuring settings via a web browser.

Key Features:

  • 2 analog inputs with switchable gain (measuring from 1 mV to 33 V): suitable for measuring voltage, DC current, AC current (with additional sensors), pressure sensors, thermocouples, distance sensors, photoresistors for light measurement, and many more.
  • 2 analog inputs with switchable gain (measuring from 1 mV to 55 V): for measuring voltage, DC current, AC current (with additional sensors), pressure sensors, thermocouples, distance sensors, photoresistors for light measurement, and others.
  • 2 analog inputs for measurements up to 3.3 V: for voltage and current measurements (DC and AC via additional sensors) and 4-20mA converters.
  • I2C bus for connecting sensors via RJ12 connector: supports a wide range of I2C sensors (list below) and DS18B20 via the 1-Wire bus.
  • Serial bus (UART).
  • Bus for RS485 converter - MODBUS RTU (additional board required): allows reading pre-configured devices and setting up configurations to read any device using the Modbus protocol.
  • 4 logic inputs: as status sensors for door monitoring, infrared motion sensors, buttons for manual switching with a bistable mode option, pulse counters for energy meters, and timers for input resets.
  • 1 relay (NO, C, NC).
  • 1 transistor output: power supply voltage output, for controlling loads with up to 0.5A current consumption.
  • 4 outputs for relay/transistor switching in OC standard.
  • 4 PWM outputs from 50 Hz to 100 kHz.
  • Measurement of supply voltage and on-board temperature.
  • Ethernet communication (10/100Mb) with 802.3af PoE support.
  • Management via a web interface.

Key interface capabilities via the web interface:

  • Viewing sensor data in an administrator or user panel with customizable layout.
  • Event configuration.
  • Actions scheduling configuration.
  • OLED display setup.
  • MQTT client, HTTP client, and SNMP protocol configuration.
  • Email notification setup.
  • Access management, firmware upgrades.
  • Local or network time (NTP) configuration.

Technical Specifications:

  • Power supply voltage: 8÷55 V.
  • Power consumption: 0.5 W.
  • Power output for Modbus devices: 12V, 200mA.
  • PoE support: Yes (802.3af) Mode A, passive Mode B with jumper.
  • Interfaces: Ethernet 10/100 Mbit/s, Wi-Fi 802.11n, RS485 Modbus RTU.
  • Operating temperature range: -20 to +85 °C (non-condensing).
  • Dimensions: 66x79x40 mm (without DIN mount).
  • Weight: 90 g.
  • DIN rail mounting: Yes (35 mm).

Code: LANCON95009

Producer: Tinycontrol

Warranty: 24 months

In stock: 4 ks

Reservation: 0 ks

Price:

52,31
RP: 0.01 €
64,35 € (with VAT)

ks

1 - 4 ks 52,31 €
5 - 9 ks 51,06 €
10 a viac ks 50,22 €

Odporúčaný tovar

Supply UPS 100W 13.8Vwith Battery Charging Function

- To charge lead acid or lithium battery-

Price:
In stock
33 ks

37,50
RP: 0.1 €
46,25 € (with VAT)

ks

Snímač pohybu PIR HC-SR501

Under construction ...

Price:
In stock
5 ks

5,38
RP: 0 €
6,62 € (with VAT)

ks

Shop owner: Times-VT, Nábr. Sv. Metoda 8, 971 01 Prievidza, Slovakia tel.: +421 (0)46 542 70 50
Created by © 2025 WebCreative.info All rights reserved.